Education

Use a sharp knife to carefully cut the rubber seal around the edge of the windshield. Pull off trim with hand while cutting. Be careful not to scratch or damage the windshield with the blade.

Push framework windshield from inside the vehicle. Someone available to help lift the windshield. Remove the gasket. Place a thin layer of sealant around the edge of the windshield.

Place a new gasket on the bottom of the windscreen so that the heavy part is inside and the groove is out. Ate a nylon rope around the outer groove of the windshield.

Place the windshield to the vehicle chassis. Hold it there for several minutes to allow the board to set. Pull the cable through the windshield of the vehicle interior to allow the rubber lip to put in place.

Use a cleaning fluid to completely clean the interior and exterior of the windshield. Clean parts of the instrument panel and power to ensure the absence of remains was to the air vents.