Apply a generous amount of urethane primer outside the new windshield in fried band. The band is fried black stripe running along the edge of the cup.

Place the rubber gasket around the edge of the windscreen.

Clean the chassis of the vehicle in which the old windshield is urethane trim in the vehicle up to 3 mm with a razor.

Clean the windshield frame you will leave with a cleaning brush. Make sure the rack is free of debris.

Apply urethane sealant to the framework in which the new windshield can. Using a stun gun for silicone rather than a single standard for a more uniform sealing. If the sealant is not placed correctly or consistently, you may have trouble getting the glass adheres properly, which could lead to a leaky windshield.

Align the top, bottom and sides of the windshield frame Plymouth and press the glass in place. You may need the help of another person for this part because the windshield to Plymouth is quite large. When you align the windshield that may be better to fix the bottom of the windshield instead of firs. Have an assistant hold to prevent slipping while you press the top in place. Allow the urethane to cure for 12 hours.