Education

Open the door as wide as possible and rolling on the main window, as far as possible. Remove the trim panel around the handle of the inner door with a Phillips screwdriver. Loosen the screws and pocket at the bottom of the panel with the screwdriver too.

Lift the door panel up and out of the door, and then disconnect the wiring for the window switch on the rear panel.

Unscrew the top of the dialog wing door frame in the vehicle with the Phillips screwdriver. Remove the bottom of the wing window door panel, and then tilt the wing window to the outside door jamb, then lift the door.

Pull the window remains slightly so you can hold on to it. Slide the window forward so that the rollers on the bottom of the window to pop out of the track.

Lift the front of the window while sliding the roller remaining hint window. Then lift the entire window and out the door.