Some people take their vehicle for professional repair of cracks and chips in the windshield, but in fact it is a task that most people can carry out on their own. The windshield repair kits include all the materials you need to crack on the windshield of your car practically disappear. It only takes an hour to do it, and the kit can be achieved in auto parts stores for less than $ 20.
Kits professional windshield repair
Although it is tempting to try some simple solutions for repairing cracks in automotive windshield using supplies that you must hand-as extra strong glue and transparent nail polish – considers the remedies as the extra strong glue and nail polish can prevent the crack from spreading through the windshield, but not the cover.
The windshield repair kits are designed to cover the crack completely and when it is done well, the crack completely disappear. There are several windshield repair kits on the market, including Eraser Crack and Fix-A-Windshield. In addition to auto parts stores, the windshield repair kits may be obtained online at stores.
The method
Remove loose glass splinter or crack. Loose glass can be extracted using the corner of a razor blade. Do not bear too much pressure, or do the crack spread. A Once the glass is removed, pass the razor blade on the glass around the crack to remove dust and residues in the area, then washed the windshield with soap and water, and continue with the implementation of denatured alcohol. This will eliminate residues of the windshield and prevent glass pieces from falling into the crack while applying adhesive. When the window is clean, allows the area to dry completely before using the windshield repair kit.
Although instructions vary from kit to kit, the basic process for using a windshield repair kit adhesive is applied directly to the crack using the included adhesive syringe. Once the adhesive is applied, leaving the tip of the syringe onto the adhesive, then pushes and pulls the plunger several times. This will eliminate air pockets in the adhesive and make it sink into all the crevices.
Make sure all the bubbles are gone adhesive. Once dry, the adhesive will leave a film on the crack, and will be almost impossible to tell if there was a crack on the windshield. If a bundle is behind the area in which the syringe is inserted, it will be almost imperceptible. Even if you prefer to remove it, wait until the adhesive has dried for several hours and then passes a razor blade smoothly over the bump to match with the rest of the glass.