Remove and install glass car can be an easy job. Before installation makes sure you have all the necessary tools and materials and even a pair of hands to help you; bonus that will be given in replacement process in a more simple way. Invest in the proper sealant, such as urethane sealant to the new window locked. Also, you should always use safety equipment while working with glass.

Instructions

1. Put on safety glasses and gloves.
2. Maintaining a steady pace, cut around the inside perimeter of the mold with the scroll window.
3. Get in the car. Gently press the glass and hit the perimeter to loosen the glue. When glass is loose, remove it carefully by hand. Ask your assistant to take the glass from outside to prevent breakage.
4. Insulation windshield cleans with mild to remove any sticky residue that has accumulated on the tape soap.
5. Seal the glass once it is in place. Uses a caulking gun, extends a thin urethane sealant layer over the entire inner windscreen frame. With the help of your assistant lift the glass back into the insulation. Apply pressure in the upper and lower windshield for a few moments to create an airtight seal.
6. Allow the urethane sealant to stand for 24 hours.